Automatic Sliding Gate Opener NICE 2000kg
RUN2000 version with built-in inverter
Perfect movement: the inverter enables the power supply and drive of the 3-phase motor single-phase current at 230 Vac, acting on the frequency to adjust speed of the automation from a minimum of 8.2 m/min to maximum15.4 m/min. In the automation deceleration phase, the inverter, which dialogues with the control unit, increases the torque, thus improving performance and reducing the risk of the automation blocking on impact with obstacles.
Safe: the acceleration setting (at the start of the maneuver) and the declaration setting (at the end of the maneuver) are precise and reliable.
The temperature sensor: Run is able to manage force, adapting it to the different climatic and environmental conditions. While adapting the thermal cut-out protection and intensity of self-ventilation, depending on temperature reading.
A master/slave: selection also automatically synchronize 2 motors, enabling the automation of sliding gates with two opposing leaves.
Practical and functional: the control unit (and inverter on version RUN2000I), housed inside Run, can be simply connected by means of the practical connector guide.
Very quit: gear motor on bearings.
| TECHNICAL SPECIFICATIONS | |||
| CODE | RUN2000 | ||
| ELECTRICAL DATA | |||
| POWER SUPPLY | 230/50* | ||
| ABSORPTION (A) | 3.8 | ||
| POWER (W) | 870 | ||
| PERFORMANCE DATA | |||
| SPEED (m/s) | 0.17 | ||
| FORCE (N) | 1390 | ||
| WORK CYCLE(CYCLES/HOUR) | 42 | ||
| DIMENSIONAL AND GENERAL DATA | |||
| PROTECTION LEVEL (IP) | 44 | ||
| WORKING TEMP. | -20 ÷ +50 | ||
| DIMENSIONS (mm) | 400x255x390 h | ||
| WEIGHT (kg) | 24.5 | 25 | |
